Revo 6 V2.0 Blade Adapter for Royobi 40V HP BRUSHLESS 21" SELF-PROPELLED MOWER KIT RY40HPLM01
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Revo6 Lawn Mower blade replacement needs a specialized hub adapter for the mower. (https://safemowing.com/)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
IMPORTANT UPDATE: there is a V2 of the spacer that provides way more stability (just make the bar 90 degrees off from those 2 posts just like the V1 version) it it prevents the blade from oscillating about the x-y plane over those little posts.
The Revo6 lawnmower blade replacement from Blade Solutions is a clever solution to solve a pair of problems: 1. mowers have a nasty habit of shredding anything on the ground (feet, etc) 2. Mowers and blades can be damaged by hitting rocks and debris, and this just slaps around them like a string trimmer (which it basically turns your mower into a powerful version of). For me I will be using this around the Barn including maintaining the riding trails through the woods which constantly smash up blades.
Anyway I use the Ryobi 40V brushless 21" mower and there is no adapter for the Revo6 for that hub, and that is due to the blade from Ryobi having a bunch of features to lock in positively to the hub of the mower. The blades are very thin and light because the motor needs to turn easily to conserve battery, but that makes it short lived. The adapters that come from Blade Solutions don't lock into the mower because they assume the only adapter is needed on the nut side of the shaft (i.e. down towards the ground) but the Ryobi needs a bunch of stuff between the blade and the hub (they have 3 parts). I made a 2 part adapter the lower part simply replaces the nylon square spacer that locks the blade with little triangle bosses to prevent the hub from spinning out of alignment and then a star shaped part that sits on top of it inside the hub of the Revo6.
I included STEP and 3MF files so if you want to tweak it feel free.
I printed the part in Prusa ASA (black) at 25% hex infill with 4 perimeters on the XL.
Installation:
- Remove both the aluminum plate and nylon spacer from the mower (and the blade obviously).
- Place the round spacer with the bosses over the nylon ring around the shaft. It should sit flush (don't worry this will not be spinning so wear isn't important). Bosses stick towards you (i.e. down) as in the diagram below.
- Push the adapter (blue in diagram) into the hub of the Revo (don't worry about the shaft alignment flat part, that comes later), make sure the nylon “blade” ends sit in the notches between each arm of the adapter. It should sit totally inside the Revo6 aluminum hub
- now pus the whole assembly over the shaft (now align the flat portion in green below with the flat side of the shaft). Make sure the arms of the adapter sit in the spaces between the bosses on the spacer
- Tighten the nut back down on the shaft. You don't need to crush it, and the Revo6 basically serves as a washer.

NOTE: THIS REQUIRES YOU TO MOUNT THE REVO UPSIDE DOWN (otherwise the keys of the adapter would have nothing to grip). But it seems to work just fine that way…