1 / 1
Magnetic Desiccant Holder for Core One with Spacers for 8x10x1.5 magnet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desiccant holder for Core, set off from the corners, and 20x8x1.5 magnets (6)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (21)Powiązane
I am using this with a different Core One dry box model, and needed to add spacers, nbdcaus eI have added insulation in the corners on the inside of the box.
I also resized the magnets holders to magnets I got from amazon.