1 / 3
Snapmaker 10W Laser Air Assist
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for standard funnel with additional air assist jets.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 326
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (14)Powiązane
There are many small air pumps on the market able to deliver up to 30l/min airflow. You just need a pieces like this one to connect them to your laser module head.
- easy (dis)assembly, no need to drill or cut into any parts
- jets made out of blunt needles, cut them to 16 mm
- air inlet compatible with standard rubber hose
Tip: you can add a microswitch to the top of the Z-beam that will disconnect DC for the air pump when the head returns to the top position when the job is finished.
