Ultimate Core One Equipment Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Equipment Rack for side of Core One designed to carry heavy tools
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Equipment Rack for side of Core One designed to carry heavy tools.
Used magnetic clips to attach rack to Core One using remix of Magnetic Clip Top Cover 8mm x 3 mm magnets (https://www.printables.com/model/1309123-core-one-magnetic-clip-top-cover-8mm-x-3mm-magnets)
Clips glued to rack or you can incorporate them in the same model using OpenSCAD or Rhino or whatever 3D modeling program you choose.
Can also modify the top of the rack with your modeling program to accommodate your own tools.
Must remove top row of plastic rivets on Core One and replace screws on each end with M3-0.5 x 20 mm socket head cap screws. Use fender washer(s) to distribute force.
Magnets might not actually be needed as screws do most of the work.
Printed in two halves to so can be done on Core One.