1 / 6
Bar Keepers Friend Lid - Airtight Seal - BKF (Barkeepers) Can / Tin - JCreateNZ — zdjęcie 1
1 / 6

Bar Keepers Friend Lid - Airtight Seal - BKF (Barkeepers) Can / Tin - JCreateNZ

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If your printer is accurate it will snap on for a tight fit and seal (but still be easy to take on and off).

Ocena
5 / 5
Polubienia
18
Pobrania
202
Wydruki
4
Wyświetlenia
442
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

JCreateNZ
---

I bought Bar Keeper's Friend but it didn't come with a lid, so I made one.

Should fit both Barkeeper's friend cleanser and cookware cleaner & polish. If your printer is accurate it will snap on for a tight fit and seal (but still be easy to take on and off).

It will also fit any other can or tin of the same diameter (roughly 70mm - 73.5mm).

There is a bottom section (without a tab) which can be used to prevent the bottom metal ring of the tin from rusting.

PLA or TPU. Can be scaled up or down 1% or more to adjust for your printer, if it is too large or small for a good fit.

Free for personal use!

---

All active supporters of my Patreon automatically receive a commercial license for some files!

https://www.patreon.com/JCreateNZ

Please check out all our other models on Cults!

---

Find us on:
https://www.instagram.com/jcreatenz/
https://www.facebook.com/JCreateNZ

Visit my website:

https://www.jcreatenz.com

Email me:

[email protected]