Stand holder for TS100, TS101, Pinecil soldering iron - stronger & symmetrical
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the idea of using a 608 bearing for the stand but required a modified version to fit with the design of my case.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 622
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this remix to fit my storing solution for a TS101/TS100 soldering iron which can be found here: Storing solution for TS101, TS100 soldering iron & addtional tools
I made a variety of gridfinity based containers/bins and made a slot for this style of holder. In my instance the stand arm isn't grabbed/held in place within the case and can be retrieved either by simply grabbing the stem or by pushing the stand arm down on one side to tilt & lift it up. Because of that I had no use for the finger groove and simply wanted a symmetrical design that features a stronger arm.
It uses a 608 ball bearing, an M3 screw of 16mm length and a nut on the opposing side. I recommend a dome head screw since they are lower profile.