Joycon 2 Wide Grip (Magnets Req.) for Switch 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've heard that many people consider the Joycon 2 grip to be a bit narrow for larger hands, so I made a wider one.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 981
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Joycon 2 grip with a wider center piece, as well as larger ergonomic grips on the rear for people with larger hands. I designed it to print in two pieces, the base that the Joycon 2 attach to, and the grip that you can easily glue onto the back with an adhesive of your choice. The grip does have a slot that it fits into so it's easier to line up. The build also requires a total of four 10x4x2 Neodymium magnets to hold the joycons in. I will add the Amazon link below for purchasing the exact ones I've used. The parts should already be in the correct orientation for printing, but I would recommend using tree supports for the base, and grid supports for the grip. If you encounter issues with printing the grip, try reducing the speed of the first layer by 50%
10x4x2 Magnets: https://www.amazon.com/dp/B09M6BJK5N