1 / 6
Ecovacs Goat A3000 Lidar Cleaning & Service Jig — zdjęcie 1
1 / 6

Ecovacs Goat A3000 Lidar Cleaning & Service Jig

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

can't really flip that thing on its back with its fancy lidar on top, right? Stick this jig on your robot for cleaning!

Ocena
0 / 5
Polubienia
0
Pobrania
22
Wydruki
0
Wyświetlenia
550
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

A mower needs to have its bottom cleaned from time to time, won't do it by itself. But the Ecovacs A3000 Lidar has it's sensitive main sensor on top and you really dont want to lay it with all its weight on that glass dome. 

This jig is stuck on its back and protects the lidar from mechanical damage. It allows the robot to be oriented vertical or on its back for easy access to all parts on it lower side. 

The build is simple, you need to cut all parts from 9mm plywood. There are two step and two fusion360 files, one is the assembly, in the other file the plywood parts are layed out for cutting. Print the two connector parts and use wood screws with length 20mm, diameter 3mm to mount them. The wooden parts are stuck together, you may use glue - used my cnc and none was needed due to nice press fit. The jig fits really nicely as I used my 3D scanner to create the model. The scan is included in the fusion360 file.

Autodesk fusion 360 files and step files are included. If you want to use plywood of different thickness, you can change the parameter in fusion360 accordingly. 

How to use:
First mount the Lidar protection cap. Then slide the jig on the robot from the back to front, then lift the front of the robot and rotate it on its back side, or continue that until it lays on its back. You need a semi-flat surface to do this on. 

Tagi