Adding a filtered fan for caged Artillery X4 Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After buying a cage for Artillery X4Plus, I needed a filter to purify a bit the air when printing ABS, PETG
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought an enclosure for my 3DPrinter Artillery X4 Plus. The enclosure has one big opening with zipper and 2 openings with velcro one on top and one on the side. Due to the dimensions of the enclosure, I turned my printer inside, so the zipper opening is on the side now.
As I starting to print ABS, to avoid smokes and mycroparticles, I print a adaptive board for the top opening (anyway it was open to let the filament spooler outside).
On this board I fixed a fan on the bottom side and a carbon filter on the top side to purify the air.
For those who are interested, I put my plans here. Is one single STL, but he has a lot of composants.
to print, the big plates are printed horizontaly, topside to the bed, the filter cage the same, the small Lshape lid same.