Zelda BOTW/TOTK Goddess Statue Concrete Mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
three part concrete or cement mold for Zelda BOTW and TOTK goddess statue
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
You can now “go, and bring piece to the world” in your own garden!
This is a three-part mold to cast a concrete or cement BOTW/TOTK Zelda goddess statue.
You want to print these in a way such that you will not have supports on the inside of your mold. It doesn't matter if you have supports on the outside of the mold (I don't even bother taking them off), but you want to avoid any supports on the inside of your mold as these are hard to remove and will leave marks on your final piece. I have attached photos of the way I like to print them with supports.
You will need to use TPU filament with your 3d printer. Additionally, you will need some Vaseline or mold release spray to line the mold with before pouring, rubber bands to hold the mold together, and the cement/concrete of your choice. Cement and concrete can be tricky, so I recommend looking up a few concrete/cement statue tutorials beforehand.
The original “Zelda: Breath of the Wild: 3D Printed Goddess Statue” by can be found here: https://www.myminifactory.com/object/3d-print-zelda-breath-of-the-wild-3d-printed-goddess-statue-32732
The tutorial I followed to make the mold can be found here: https://youtu.be/tiydT2_OVLs?si=7fnlr2mijafAMmQG