Lenovo M11 Tablet Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two piece wall mount for Lenovo M11 Tablet. Mounts with 4 wall anchors
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 162
- Wydruki
- 1
- Wyświetlenia
- 969
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Two piece wall mount for Lenovo M11 Tablet. Mounts with 4 wall anchors. Mounts with just enough of a gap to pass the USB power cable behind it. Tablet can slide in and out of mount easily. There are even holes over the speaker grills!
Requires supports for the lip that holds in the tablet. 3mf file with painted supports is provided.
Install with 4 wall anchors. Be sure to space the two sides so that the tablet is held firmly, but can be removed. This would be a lot easier if it were one piece, but the tablet is bigger than my print bed. (This model fits on a Prusa Mini!)
I modeled this from scratch for the M11, but it was conceptually inspired by this similar model for the M10: https://www.printables.com/model/246872-lenovo-m10-fhd-wall-mount