1 / 5
NanoBeam - Small Flashlight - Attach & Use It ANYWHERE ANYTIME (one-of-a-kind)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very small and convenient flashlight attachable to anything: glasses, knifes, guns, teeth, guitar etc.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
The application of this gadget is so versatile - you can use it anywhere. Attach it to anything using hot glue:
- Knifes - so you can see what you are knifing (not legal advice)
- Phones - so you can feel like a professional photographer, or at least someone with a light
- Your teeth - if you have iron teeth OR a cyborg, attach a magnet to the NanoBeam™ and illuminate your next meal
- Pens - study like Harry Potter (under a blanket, with dramatic flair).
- Etc. - the possibilities are limited only by your imagination or local regulations.
Hardware needed:
- SS12D00G5 switch - 1 pc (or similar-sized toggle switch)
- White LED 5mm - 1 pc
- CR2032 - 2 pcs
- 200 ohm resistor - 1 pc (if you are a coward or a vampire and afraid of bright light)
- wire - idk some amount, 50 meters maybe. I'm very bad at math.
- hot glue - a lot
Properties:
| Property | Value | Value (freedom units) |
| Length | 44 mm | ~2 days of elephant toenails growth |
| Width | 10 mm | ~0.00911% of standard american football field |
| Survived fall without disassembling | 3 m | same as an adult female giraffe's head height |
| battery life | approx. 15 min - 2.4 hr without resistor, but live fast die young OR from 12.8hr to 8hr with 200 ohm resistor but less exciting | some comparison to american football game time |
| IP rating | Depends on the amount of hot glue, up to IP68 | oh man i ran out of jokes about americans, lets say it can withstand a dip in ranch dressing? |
| Weight | 12g (15% grid infill, IP68 hot glue amount, assembled) | a little bit less than 3 quarters |
| Snap fit | Yes | HELL YEAAAAH |
Recommended print params:
| Property | Value |
| Infill | 15% |
| Pattern | Grid |