wall bracket & Case for Intel NUC Case (for T-5)--easily removable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
basic dimensions off the NUC 12*12*2.5cm Designed to have bottom of case facing out to allow ventilation. Lifts off
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Wall bracket Intel NUC Case (for T-5)--easily removable - just lifts off bracket
basic dimensions off the NUC - 12cm * 12 cm * 2.5cm
Designed to have bottom of case facing out to allow ventilation.
Side vents also clear as are the main ports.
This model used 4 M3*12 bolts and 4 square nuts that are pushed in their respective pockets.
Square nuts dimensions: 2.4mm thick width 5.4mm
The separate clip is screwed to the wall and the whole case can then simply be “hung” on there and lifted off when needed.
As the case is in 2 parts any rubber feet should clear the frame, if not, just remove them.
Printed in PETG on Prusa MK4S - 0.2 structural - Infill 15% - bottom layers 4 height 0.2 perimiters 4 top 5. no brim or supports.