Flash Forge Creator Pro - active cooling fan holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap on 40mm nozzle fan holder. I'm using mostly the right extruder so that's what I build this for. But there is also…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 365
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Snap on 40mm nozzle fan holder.
I'm using mostly the right extruder so that's what I build this for.
But there is also left version and a center one.
I'm not sure how good the center version works as the fan is blowing between the two nozzles.
It simply snaps into the two small holes on top of the extruder carriage.
Screw the 40mm 24v fan with two little 2.5mm screws to the holder and connect the fan cable to the unpopulated FET6 connector on the Mightyboard.
Especially PLA print quality is much improved with a nozzle fan!
Print Settings
Notes:
Print with ABS as PLA might melt or get soft because of the short distance to the nozzles.
Category: 3D Printer Parts