Super simple fan holder for the Flashforge Creator Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE: I made a better one: http://www.thingiverse.com/thing:1272643 This is a really simple and functional holder…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
###UPDATE: I made a better one: http://www.thingiverse.com/thing:1272643
This is a really simple and functional holder for a 40mm nozzle fan for the Flashforge Creator Pro.
It simply snaps into the two small holes on top of the extruder carriage.
Just tape the 40mm 24v fan with a flexible two sided tape to the holder and connect the fan cable to the unpopulated FET6 connector on the Mightyboard.
It works wonderful and my print quality when printing PLA went up considerable.
I tried other complicated fan ducts but couldn't notice any difference in the print quality.
Some overengineered ducts actually led to inferior results.
Category: 3D Printer Parts