Sheet/plate film storage box (4x5 - 5X7 8X10)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New film/plate storage, less cumbersome than a box in a dark bag, smaller footprint. Opens like a dark slide.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 630
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted something less cumbersome than a box in a dark bag for changing film, also wanted something more sturdy that I wouldn't worry about sharp metal/glass corners cutting the film bag and letting light in..
Printing is pretty simple - LOTS of walls/top and bottom and a bunch of infill with black PLA plus makes these light tight.
Make sure you have supports for the overhangs where the dark slide goes.
I used a sheet of aluminum cut to size for the dark slide (bend over at the end to make a stop/handle KISS) and some 1mm self adhesive felt in the dark slide channel to make sure everything was light tight.
To assist with getting film out I folded some paper to create a lifting mechanism.. basically a U shape with one edge taped to the bottom so when you put your film inside the U shape you can just lift the paper and your sheets are easy to access :)
If this helps please follow me on social https://www.instagram.com/scotthendersonphoto/
