Animatronic Butterfly (Solar Edition)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun, colourful, movable addition to the garden, or sunny spot in the house.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
Ready for the Sunny Summer Garden, an Animatronic Solar Butterfly.
This project uses a GM23 motor.
Insert the two separate “Butterfly_Wing_Spars” into the slots of the “Butterfly_Carriage_0”
Glue a rod of PLA into the hole at the base of the “Butterfly_Body_Head_Feeler” , insert the PLA through one of the “Butterfly_Wing_Spars”, then thread the “Butterfly_Eyelet” and then feed through the second “Butterfly_Wing_Spar”.
Feed the motor into the “Butterfly_Carriage_0” and secure the “Butterfly_Motor_Spindle” with screw, glue a piece of PLA through the spare eye of the “Butterfly_Motor_Spindle” and feed this through the bottom of the “Butterfly_Eyelet” . slip the “Butterfly_Swash_Adjust” around the “Butterfly_Eyelet” (this is to adjust and limit the movement of the butterfly wings.
The wings can be glued into place using the small "Butterfly_WingClamps"
The “Butterfly_Carriage_0” can be slotted into the "ButterflyBase_0"
There is a small hinged part that a solar cell can be attached to, and angled for best results.