Elegoo Centauri Carbon Purge Bin- No support, mirrored + extended

I needed a poop bucket that I could access from the left side, so I slightly modified this model. 

The screw mount doesn't align with anything correctly anymore, but I didn't need it to anyway, I glued it to the housing with some double-sided tape and then just put a magnet over the mount piece to hold it in place. The mount is a part of the housing, so you can move it or delete it entirely if you don't need it. In any case, like the OG model it needs to be printed separately to avoid using supports.

It doesn't reach all the way to the edge of the printer, because I needed it to be printable on my ECC. But it's close enough for my needs - check the images on how close it is. I sadly forgot to take pictures right after I mounted the bin, but it looks pretty much identical to the original model, except mirrored and longer.

I'm not really proficient with CAD and I pretty much just did the bare minimum to fulfill my requirements, but maybe it's useful to anyone else as well.

Can all be printed together on the ECC, took about 8 hours with the default Generic PLA settings.

Note: Since it is longer you need a bit of clearance if you want to pull the bin out completely.