1 / 7
Contigo cup base
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a base I made for a co-worker who was having stability issues with his cup at the beach. Now with V4.1.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A co-worker required a base for his mug/cup and I am new to onshape so I made this up for him. He said it works well. Its 110mm dia. at the bottom inside is 79.6mm dia. It is meant to be hot glued on. Edit June 11, 2025 added v3 wider part at the bottom for stability and slightly deeper. Now V4.1 has an O-ring so glue is not required.