DIY RC Dumptruck Trailer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Built to haul all your raw material needs whether its beans, dirt, or jenga blocks.
- Ocena
- 0 / 5
- Polubienia
- 250
- Pobrania
- 1095
- Wydruki
- 1
- Wyświetlenia
- 6060
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a fully functional RC Sidedump trailer meant to pair with the 3D Printed RC Semi. It uses two motors with threaded rods for pushing/dumping power and can be dumped off to either the left or right side thanks to a locker bar controlled via servo. For more information on how it was designed I'd highly recommend checking out the YouTube video linked below.
If you print a couple pieces and decide you like the model you can make it fully remote control by joining the professorboots workshop on my website and following the step by step guide: https://professorboots.com/products/professorboots-workshop-pass