Replicator (plus CTC and other Clones) Dual Extruder Level
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a level tool for the dual nozzle Replicator (and clones such as the CTC Bizer).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 536
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a level tool for the dual nozzle Replicator (and clones such as the CTC Bizer).
I didn't want to take my entire print head off of it's carriage to level nozzles. Unlike some of the older printers the nozzles on the CTC are held on by a grub (set) screw and don't require removing the heatsink bar that holds them in place to line them up.
So this is a shorter version of other tools for aligning the nozzles with each other and the carriage. You should be able to press it into place, make sure the nozzles are flush with it, then tighten their setting screw and call it a day. I also put mounting screw holes similar to other tools in case they come in handy on your carriage.
Find more of my work at https://pcburn.com
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: SeeMeCNC
Printer: Rostock MAX v2
Rafts: No
Supports: No
Resolution: .3
Infill: 20%
Notes:
Seemed to work just fine as a PLA print.