1 / 4
AirPetz Chonky : Apple Airtag case for chonky pet cat & dog
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Apple Airtag case for pets; Easy assembly - Pop it in, Twist, and Slide; No stitching nor glueing required
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 137
- Wydruki
- 1
- Wyświetlenia
- 472
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (25)Powiązane
Use Case:
- Works for the following typical strap sizes:

Printing Tips:
- Recommended material: PETG, PLA
- Recommended infill: Gyroid at 40%
- No supports and brims needed
- Works perfectly for printers with 0.10mm tolerance (0.20mm is acceptable)
- Print Bed Orientation: as shown below…

How to Assemble:
- Casing assembly (same as the original AirPetz version)

- Pet collar assembly (same as the original AirPetz version)

How to Disassemble: (same as the original AirPetz version)
- Compress with both palms
- Twist counter-clockwise for about 30 degrees (or until it can't turn)
- Release the top cap

Thank You!

If you like what I do and want to support my projects, it means a lot. Your support helps me keep making, fixing, and sharing the things I love—no pressure, just gratitude. Thanks for being here.
https://buymeacoffee.com/kraavs
