Dynaplug Racer Pro Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Offset and inline mounts for Dynaplug Racer Pro.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 155
- Wydruki
- 1
- Wyświetlenia
- 688
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
A simple mount for Dynaplug Racer Pro. This is designed to be relatively low profile.
EDIT: 4/30/2026 -- Added an inline mount version.
This model has 20mm of built-in adjustment. It is based on a 40mm tube diameter, with the Dynaplug ending up just below the level of the mount. It is designed to work in tandem with a top tube bag, but also works under water bottle mounts (or on its own).
Note: It is easy to change the tube diameter, or mount size/diameter for other applications – eg. a steel bike with a 1in top tube and mounting a small pump. If you need an adjustment, please in the comment include: tube diameter, diameter of object to be mounted (in mm), and length of mount clip.
Printing:
Designed to be printed in vertical orientation (layers running across short axis) with organic supports. Printing in other orientations the clip will not work correctly.
ABS or Nylon are probably the ideal materials for this if you can; I can't so am running it in PTEG. I printed with 3 walls and at 40% infill.
https://cad.onshape.com/documents/10a9e233c5d38680bb6bcb1e/w/9aff54c7726c386ed5a2af35/e/d15ff310e78e7369b9ba2b06