1 / 2
Monorail Beam for Disney Model - 500 mm radius ***older design, use the newer ones***
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Monorail Beam for Disney Model 500 mm radius Upper beam, lower beam, connector, pylon cap, 60 mm tall pylon
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
5 print pieces to make 1/16th of a 500 mm circle of beam for the Disney monorail model. The parts can be assembled with epoxy (best but most work), hot glue, or CA adhesive.
The joints are precise but can be improved with filing/sanding/putty. The smooth joints will greatly reduce the noise of the train.