1 / 12
Dice Tray, Tower, and Latching Lid - War Gaming Terrain and Blank Themes — zdjęcie 1
1 / 12

Dice Tray, Tower, and Latching Lid - War Gaming Terrain and Blank Themes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My FLGS was using a shoe box lid as a dice tray. I knew what needed to be done. I started with just a large 200x200…

Ocena
4 / 5
Polubienia
32
Pobrania
103
Wydruki
1
Wyświetlenia
555
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My FLGS was using a shoe box lid as a dice tray. I knew what needed to be done. I started with just a large 200x200 dice box, decided why not add a lid to keep dice or to use it as terrain, then of course I had to add a tower that could fit inside while storing it.

The inspiration for the design came user Terrain4Print https://www.thingiverse.com/thing:3533463

There are 50 dice in each of the pictures for reference.

The top with the grid is 28mm squares.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

**Rafts:**

Doesn't Matter

Supports:

No

**Resolution:**

.2

Infill:

15

**Filament:** Extrudr PLA NX2 Black

Notes:

Print the tray normally.
Print the top upside down.
Print the tower on its side.

Category: Dice

Tagi