Optimus Prime G1 style Ion Cannon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Human sized replica of the G1 styled Optimus Prime Ion Cannon for display or Cosplay.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 815
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a Prime gun to hang on the wall or put on a stand. I'm sure that there are others out there, but I wanted to design one.
The parts are designed to print with minimal supports, and the model snaps together. All of the colored detail parts print separately.
There is no glue or any screws required. The parts will download in the orientation that they should be printed. Feel free to do what feels right to you. 😊
I recommend 3-5 wall loops with a 8-10% infill. I use default auto tree supports for most of the parts. I will add a note to the part if it would print better with automatic manual supports.
I did add note to some of the files. Please be mindful of any specific instructions as they will effect those parts.
The total print time is around 50-60 hours (using anycubic kobra 2 machines - will vary depending on print parameters and printer speeds)
Have fun, print away, and I hope that it brings someone as much joy as it brought me!
Barrel 3- Add support blocker as shown-
Barrel 3 side details & Barrel 4 stripes- Add support enforcers as indicated in pic with auto supports enabled.
