Nintendo Switch 2 Joy Con Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic Joy Con Grip for the Nintendo switch 2.
- Ocena
- 5 / 5
- Polubienia
- 107
- Pobrania
- 682
- Wydruki
- 2
- Wyświetlenia
- 4486
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
IMPORTANT - Magnets required for this project
I wasn't able to find any good 3D printable Switch 2 Joy Con grips, so I decided to model one for myself. I've printed it, tested it and it works great coming from my Elegoo Neptune 4 pro.
Additional hardware required
- 12 5x4mm neodymium magnets (or 24 5x2mm)
- Some superglue
Assembly instructions
When gluing the magnets into place, make sure to alternate the polarity between the magnets that are next to each other, so when working your way from the top down, glue a magnet into place, flip your stack of magnets and then do the next. Repeat this pattern for a strong connection.
Enjoy!
I've found using tree infill works the best for this model. This can of course vary per printer.
Printing on the top face has worked flawlessly for me.