Kossel Mini Hexagon Heat Bed and Glass Plate Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Having decided I quite like Boo's Adjustable Mini Kossel Hotbed and Glass Bed Clamp V2 design I decided to modify it…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 433
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Having decided I quite like Boo's Adjustable Mini Kossel Hotbed and Glass Bed Clamp V2 design I decided to modify it to my purposes.
To wit; I needed more-than-side-pressure retention on the glass plate. This modification adds a lip which very slightly reduces the build area but will clamp the bed securely during movement.
I've also broken out the build into a separate boot (Kossel-Hexagon_Heat_Plate_Mount) and clip (Kossel-Glass_Bed_Mount_Clip) design. If you already have the boot printed you only need my clip modification if you'd like to use it.
Also, although it's not pictured, the underside of the heated bed is cushioned and insulated with Aerogel. If you are to do this make sure your electrical joints are sealed up just in case your insulate is conductive.. I achieved this with some high-temp silicone good to ~300 degrees Celsius over any open conductive point.
Print instructions
Category: 3D Printer Parts Print Settings
Printer Brand: Rostock
Printer: Rostock MAX V2
Rafts: No
Supports: No
Resolution: 0.2
Infill: 15%
Notes:
Printed in ABS for better heat resistance.
Post-Printing
Tooling the Part
In my case I drilled out the holes in the clips to 2.9mm. 3mm would probably work as well; I prefer a slight under-size so the threading will grip on my M3 fasteners.
Fastener BOM
For this installation I used M3 bolts that were a bit too long, buffering them to the correct height with M3 Nuts on top. Square M3 nuts were used to hold the clips to the 1515 channel.