1 / 15
Heat: pedal to the metal board game insert w/ sleeved cards w/heavy rain w/ tunnel vision NO LID LIFT — zdjęcie 1
1 / 15

Heat: pedal to the metal board game insert w/ sleeved cards w/heavy rain w/ tunnel vision NO LID LIFT

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Insert for Heat Pedal to the Metal with support for sleeved cards, Heavy Rain exp, and Tunnel Vision exp

Ocena
5 / 5
Polubienia
65
Pobrania
334
Wydruki
3
Wyświetlenia
2618
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Insert/ Organizer for Heat Pedal to the Metal board game.  

  • Supports sleeved cards
  • Supports Heavy Rain expansion
  • Supports Tunnel Vision expansion

There are individual player holders for the car, shifter, starter cards, 7 heat cards, and 3 stress cards with some room to spare.

The card holders have the names of the cards for each slot.

You will need to print out one of each STL except for the following:

  • 8 x HeatPTTM-Player.stl
  • 4 x HeatPTTM-spacers.stl

The pictures show how it all goes in.

This was printed with bambu studio defaults except 15% infill and 3 walls.
.2mm layer height
.4mm nozzle

I use gamegenic sleeves for this game.

If you have found this model helpful or fun, please "like" the model as it helps towards getting additional filament for printing. Also, if you enjoyed this model and want to see more, please consider buying me a coffee.

https://www.buymeacoffee.com/gameyspirits

 

Tagi