Prusa Left Bin with Buddy3D Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the left bin model to add a camera mount for a Buddy3D camera with a bit of height
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 49
- Wydruki
- 3
- Wyświetlenia
- 219
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I had my camera mounted on my enclosure in the upper-left corner but found the height of the image to be less than desirable. Since I was also in the process of making sure the enclosure could be easily removed without significant changes to the printer setup, I decided this was a time to mount it differently - and the bin I had recently printed was the perfect support point.
The actual mount is a bit of an organic thing to get a bit of height and a better angle for the camera - it let me practice some new tools in Fusion.