1 / 4
Paint can spout (parametric design)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevents the outside of cans from getting messed up
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 375
- Wydruki
- 3
- Wyświetlenia
- 1297
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (1)Kolekcje (75)Powiązane
Haven't found a good design of spouts for paint cans that are in common sizes where I live, so I made one.
STLs for 0.75l and 2,5l cans are attached, but feel free to adjust the inner and outer parameters in the Fusion360 file to get another size. Simply type in the measurements and the tolerance should make it fit.
Other design aspects help with that fitment too like the inner chamfer and the not closed up circle. Just push it on hard and it seals up quite good.