Tupperware MahlChef inner part replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part is a replacement for the part carrying the metal cylinder.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I created this part, as the original broke. Unfortunately the thing is not mine, so I cannot show a picture of it.
I printed it 2 times already. The first version made from PETG worked fine, but with a very hard piece of cheese, the threaded portion on top broke off. The second print was done with Nylon, and seems to hold up so far. Due to the required print orientation, you need something with good layer adhesion. It should probably at least be PETG.
It is designed to be printed with support only on the lower rim. The top overhangs should all be printable as bridges. This however depends on the tuning of your printer. The lower rim, however, definitely needs support, as shown in the screenshot.