40 series profile pivot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was wanting to add a shelf/tray to my racing simulator...but, I wanted it to be movable
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
Needed a pivot for my racing simulator rig…I wanted to add a shelf, but needed it to be movable….making it easier to get in and out of rig
I printed it with 40% infill and with 4 walls, perimeters, tops, and floors
There is also a pin you can print and insert into the bottom of pivot to keep it from turning on the profile( you may need to print pin at 99%)
M8x20 cap head bolt for mounting to profile
M5x55 cap head bolt for the pivot attachment
M5 hex nut(pressed into bottom of pivot)
Slot between ears/lugs is 20mm wide
object swinging inside slot should be just under 20mm radius