Moment of Inertia Measurement System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These stl files produce parts that can be used to build a system to measure the Moment of inertia of object.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
These files can be used to create the parts for a system to measure the Moment of Inertia of objects. The parts list contains components that allow one to use quarters as weights, but to use the system for arbitrary objects, a mount for that specific object will need to be constructed that allows the object to be attached to the flywheel with 12 mm posts in such a way that the c.g. is centered over the flywheel shaft. A complete set of files of supporting analysis and construction can be found on the link on the video page and a video of the system in operation can be seen at: