Velotric D1Plus Battery Cavity Dust Cover.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is specific for the Velotric D1 Plus e-bike. It’s to cover the battery terminals on the bike when not in use
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is specific for the Velotric D1 Plus e-bike.
It’s to cover the battery terminals on the bike when the battery is not installed.
Should be used when transporting bike by car or for storage when bike is not in use.
There are two styles; 1. Just the round unit to cover the plug section; 2. The combo one that covers the other two terminals inside the bike.
Please note these are not meant to be waterproof, but are to be used as dust covers and protection from grit, sand and cobwebs when bike is not in use.
TPU-95 at 35% or more infill is best, but PLA or ABS can also be used.
See my dust cover for the D2.