Lastminute engagement ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If it hits you on Valentine's Day - Printable in 15 minutes!
- Ocena
- 4,5 / 5
- Polubienia
- 59
- Pobrania
- 394
- Wydruki
- 5
- Wyświetlenia
- 2087
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
I proposed to my wife so spontaneously that I couldn't get the engagement ring until later.
To prevent this from happening to you, I have designed a 3D printable ring that you can hold in your hands in about 15 minutes!
For the best effect use Prusament PLA Oh My Gold (Blend) or Prusament PLA Viva La Bronze for the ring and Clear PLA filament for the diamond!
Choosing the right size
Finds an existing ring of the desired one and measures the inner diameter. Look for the matching ring in my table and print the corresponding ring_mm.stl file.
| Inner perimeter (ring_mm.stl) | Inner diameter | EU ring size measure |
|---|---|---|
| [mm] | [mm] | |
| 50 | 15,9 | 10 |
| 51 | 16,2 | 11 |
| 52 | 16,5 | 12 |
| 53 | 16,8 | 13 |
| 54 | 17,2 | 14 |
| 55 | 17,5 | 15 |
| 56 | 17,8 | 16 |
| 57 | 18,1 | 17 |
| 58 | 18,4 | 18 |
| 59 | 18,8 | 19 |
| 60 | 19,1 | 20 |
| 62 | 19,7 | 22 |
| 64 | 20,3 | 24 |
| 66 | 21,0 | 26 |
| 50 | 15,9 | 10 |
Print settings ring:
- 100% Infill
- 0,12mm Layer
- No support needed
Print settings diamond:
- 100% Infill
- 0,12mm Layer
- No support needed
- optional: Brim
Postprocessing
The diamond needs a drop of glue to stay in place.
Good Luck!
