Custom saber chassis inspired by LGT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chassis for custom saber inspired by one used in LGT sabers
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hello!
I'm presenting to you my spin on the LGT-type lightsaber chassis. IMPORTANT! This is a LGT-inspired model, not a copy!
The model was carefully measured and fitted, so that it could be compatible with the chassis available on the market. So if you have a broken flap, or want to try out a different color, please, be my guest to try out this model and see if it fits you.
This one will be a work in progress, in future I plan to add an additional variant of the model, for printing in resin, that will include pins, for better connection. Also I'll add the possibility to use heat inserts in the connection points, as now the wall is a bit too thin.
Also a big shout-out to @Ant_271963, as his variant of LGT chassis has inspired me to start this one. Please check him out and also use his Neopixel PCB holder, as it fits perfectly in this design.
If you also are interested in the editable STEP model, please contact me directly and use a password “This is where the fun begins” wink, wink
Printing instructions:
Model can be printed using FDM and Resin printers.
I wouldn't go above 0.2mm with FDM as some features might be lost. Please use supports and take note of the orientation, I've specifically added 45 degree cut, to put the model on it for better layer definition