1 / 2
Finger Tape Dip Can
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic "dip can" for finger tape or anything else that'll fit in a 75mm x 10mm cylinder.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Case designed to keep a roll of finger tape (0.3" x 45') clean in my bag. Uses (24) 5x1 magnets. Probably don't need 24, but it works nicely as is. The magnets fit snugly in the modeled holes, but a dot of super glue helps keep them in place. Make sure you press the magnets in to fully flush and be careful to match polarity around the circle and on the opposing half.
STEP file is there to easily change the depth.
Stays closed in a bag but opens easy with a small twist to dealign the magnets.