Pellenc Fixion 1 arm / bras pour Pellenc Fixion 1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
arm to support the spool like the on Fixion 1 Tying machine bras de support pour bobine du torsadeur Fixion 1
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Standard Digital File License
EN
Disassemble the device and remove the old mount.
Reuse the metal ring by placing it back into the notch between the two printed parts.
Reuse the spring by placing it between the coil and the arm, then screw the coil back on.
Place the power cable spring into the notch.
Reassemble the device with the new arm.
Printed in PETG for increased strength.
Feel free to ask your questions via chat.
FR
Démontez l'appareil et retirez l'ancienne fixation.
Réutilisez la bague en métal pour la remettre dans l'encoche entre les 2 parties imprimés.
Réutilisez le ressort pour le mettre entre entre la bobine et le bras et revissez la bobine.
Placer le ressort du câble d'alimentation dans l'encoche
Remontez l'appareil avec le nouveau bras.
Imprimé en PETG pour plus de résistance.
N'hésitez pas a poser vos questions par chat.
Twister / Torsadeur Fixion (1 and 2) :
https://www.printables.com/model/159949-twister-torsadeur-pellenc