Prusa i3 Mk3 Z Height Tests and Live Adjust Models
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a variety of Z height adjustment tests.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 583
- Wydruki
- 1
- Wyświetlenia
- 2818
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
I needed a variety of Z height adjustment tests. So I created a variety of heights (.15, .20, and .25 mm) and a few different types including 140mm square and circular prints.
This should let you visually asses your Z axis height. In my opinion, it's a bit easier to have a nice large print area kicking out than the prusa built in line after line then squiggle at the end. It never has enough area for me to dial in the height properly beofore it finishes.
Find more of my work at https://pcburn.com
Print instructions
Category: 3D Printing Tests Print Settings
Printer Brand: Prusa
Printer: i3 MK3 MMU 2
Rafts: No
Supports: No
Resolution: Various
Infill: 100%
Filament: Any Any Any
Notes:
You'll want the file with the correct height for a single layer print. Make sure the file's height matches up with your current settings in your slicer.