1 / 2
PML X-Calibur Nosecone GPS Mount (Eggfinder GPS) — zdjęcie 1
1 / 2

PML X-Calibur Nosecone GPS Mount (Eggfinder GPS)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nosecone Mount & Coupler for the PML (LOC) X-Calibur to fit the Eggfiner GPS unit and 7.4V Batt

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
64
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Nosecone Mount and Coupler for the PML X-Calibur to fit the Eggfinder GPS unit & 7.4V LIon Batt.

Requires:

- 2.5mm x 4mm Heat Insert Nuts x8
- M2.5 x 7mm Cap Screws x6
- M2.5 x 5mm Cap Screws x2
- M6 Eye Bolt and M6 Lock-Nut

I printed these initially in PETG, but have recently reprinted in PETG-CF, my initial design had a flaw where the board could snap off the base, but this has been rectified in this build with added fillets.

Eggfinder attaches to board using the 2x M2.5 Cap Screws.

Coupler is designed to be epoxied into the existing nosecone after cutting off the base of nosecone, it is then attached using the 6x M2.5 Cap Screws.

Recommend 40% + Infill and 3 Walls

This has withstood more than 10 Launches to date with no issues other than the one mentioned above!

 

Tagi