1 / 2
CanChecked MFD28 Holder for Golf 4 Air Vent/LEFT
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting a CanChecked MFD28 in an Golf 4
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 1331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This mount is designed to fit the CanChecked MFD28 display into the left air vent of a VW Golf 4.
It is compatible with both Gen1 and Gen2 models, as they share the same dimensions — I have tested both versions.
- Print with supports — I recommend using tree supports.
- Use 3 walls/perimeters for added strength.
- A minimum layer height of 0.12 mm is recommended for a clean appearance.
- PETG or similar materials are recommended for better heat resistance.
However, I've used SUNLU PLA+, which also works fine.
To install, the display's original frame must be removed, and the metal pins bent upwards.

Insert the display and its aluminum frame into the holder. It should fit snugly due to the bent pins.
For added stability, apply a few drops of hot glue to the backside to hold everything in place.
