Japanese Lantern - Wood and Rice Paper, Hanging or Freestanding - UPDATED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A multi-part assembly of a functional Japanese-inspired wooden toro that can be either hanging or free-standing
- Ocena
- 0 / 5
- Polubienia
- 54
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 589
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
UPDATE - Now features 3 alternative roof, body and feet designs. Also a base suitable for an LED tealight style light source has been included, with the option to add the reflector later if necessary. Mix and match the styles of parts, they are all interchangeable - create your own custom combination or several of each different style.
This five piece assembly is a nice decorative item or makes use of cut pieces of plastic milk jugs to simulate rice paper walls, and can be equipped with LED components in the underside of the roof to produce a functional lantern. Mine has been hanging from a tree outside in full weather and lit 24/7 continuously for over 4 months now! It is a beacon to light my way home when I wander, in any weather.
The roof features a hidden inlet for a 5mm cable to supply a dimmer circuit mounted within a recessed space supplying a COB LED module mounted to a triangular pattern of 3 screw holes.

Assembly of this lantern involves cutting flat sheets of semi-translucent white HDPE from the sides of an empty plastic milk jug and slotting them into the recesses inside the latticework sides of the main body prior to gluing the lid spacer piece in place, retaining them.

Assemble the electronics within the underside of the roof and then glue the roof in place on top of the lid spacer piece attached to the body. The hidden cable routing is designed such that rainfall should not (and so far has not on my original lantern) make its way inside the roof to damage the electronics, however it may be beneficial to squeeze some silicone adhesive into any gap around the cable.
The base features a truncated hexagonal pyramid as a form of reflector. A multi-material printer owner may choose to print this in a white filament, but for the rest of us a layer of kitchen alfoil works perfectly well, even if it's a little janky. The intention here is for the origin of the light source to be hidden within the roof and to reflect off the base such that the light cast by lantern is seen to be evenly illuminating the HDPE sheets in the lower half of the lantern, as if it were housing a tealight. This keeps the electronics securely mounted up within the roof where they are protected from heavy rainfall.
The base also features a series of 5mm diameter water drainage holes to ensure any rainfall that has entered the body of the lantern is able to drain away. These also double as a point of entry for a cable to be fed up inside the lantern for a free-standing arrangement if desired. The cable may be glued to the inside of one of the corners of the hexagonal body.
The base and feet can be assembled to the lantern without using glue, fastened through the 6 x 4mm holes in the feet and base into the 3mm holes in the underside of the body. These will suit a 6G (3.5mm) x 40mm wood screw and allows for the lantern to be opened for future servicing of the electronics if required.
Example LED module:

Example dimmer circuit:
