Kingdom Come Deliverance 2 MousePad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kingdom Come Deliverance 2 MousePad 250x250x2mm
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed on Biqu Glacier with Bambu H2D.
— Print settings
Infill: 100% rectilinear
Infill direction: Check screenshots. I printed with the lines going 180 (left to right). Top to bottom should be fine. I don't think the default 45deg will look good.
Wall generator: Classic is fine if not scaled but I don't remember which one I used. Arachne if scaled down. I think classic will fail a bit with the smaller details.
Print with the logo laying on the bed.
— Additional info
Glued some 2mm foam I had laying around on the back. Some people say that suede can also work.
The texture is fine but I find it is a bit more prone to get dirty. I will try to print with smooth plate once I receive one and update the page with my findings.