Pentax 67 bayonet filter clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A plastic clip replacement for Pentax 67 bayonet filter.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
A plastic clip replacement that go inside Pentax 67 bayonet filter.
I broke mine when trying to get the stuck filter out. Mine was a 100mm bayonet filter so I'm not sure if it will work with other size.
I would recommend that you create the clip form thin metal strip because it should be stronger (and maybe easier to create?) if you have the tools. But for my purpose, this work just fine.
About printing, it's very small and thin so I suggest you use brim or support to get the model to stick to the plate. I also use 0.1mm for layer height and first layer height. I'm not sure it does anything but since such a small model, you could try experiment as you prefer.