1 / 3
Traction Assist Wheel for Parkside PMRDA 20-Li B2 robot lawn mower — zdjęcie 1
1 / 3

Traction Assist Wheel for Parkside PMRDA 20-Li B2 robot lawn mower

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D-printed assist wheel for Parkside robot mower; boosts traction and turning on grass with a toothed design.

Ocena
0 / 5
Polubienia
30
Pobrania
292
Wydruki
0
Wyświetlenia
1612
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

3D-printed auxiliary wheel for Parkside robotic lawn mower, designed to mount onto the drive axle to enhance turning capability and traction on grassy or slippery terrain. The toothed outer edge improves movement efficiency, while the internal hexagonal cutouts reduce weight and filament usage.

 

Printing Recommendations:

I recommend printing the wheel in PETG or ABS for strength and durability. A 15% infill works well, and I suggest setting the wall count to 6 for added robustness. Make sure to enable supports.

The axle nut cap can be printed in PLA. It needs supports as well.

 

Installation:

After removing the outer cover of the wheel, unscrew the axle nut. Carefully align and fit the traction assist wheel onto the axle (make sure it seats properly and fits snugly). Then, firmly screw the axle nut back on. Once that's done, and if you've printed the axle nut cap, snap it into place as well.

 

Post-Installation Check:

For the first 1–2 weeks after installation, it's a good idea to check the axle nut daily or every other day. If needed, tighten it to ensure the assist wheel stays securely in place.

 

 

Buy me a coffee

If you like my work buy me a coffee!

Tagi