Wall Brackets for Saber Stand Lightsaber Wall Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Saber Stand wall brackets for both the bottom cup and the blade holder that use Command Strips to attach these
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 606
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really like the Saber Stand brand of lightsaber mounts for displaying lightsaber (https://www.saber-stand.com/ and no I don't get an affiliate fee!). My only problems is that I tend to try and attached them to things such as glass and mirrors, which their wall bracket is not designed for, plus I don't like drilling a lot of holes in my walls, I have a LOT of lightsabers.
To solve both of these issues I have designed a series of wall brackets for both the bottom cup and the blade holder that use Command Strips to attach these to almost anything, such as glass, mirrors, and painted drywall, with no holes. I do NOT have a model for the bottom cup, you will need to purchase that. I do have a design for a blade holder that is different from the original, uses Command Strips, and you can print it in any color, such as matching the lightsaber blade color if wanted.
I advise printing the wall mounts for the cups upright using supports for the strength of the entire piece, do NOT print them flat on the bed to avoid breakage at the thin parts. It doesn't apply to the blade holders since they bear almost no load.
IMPORTANT- Test these with loads to make sure they will hold the weight before you put your valuable lightsabers in them. I'm not responsible for any failures, as there are to many printing errors or Command Strip errors that can happen!