X-Shot Micro Reshell 5 v1.0 - Double Hammer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hammer-action reshell for the X-Shot Micro 1, but now double-barelled!
- Ocena
- 5 / 5
- Polubienia
- 19
- Wydruki
- 2
- Wyświetlenia
- 438
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Standard Digital File License
This is a 3D-printable shell from the GenCo Microwerks for the X-Shot Micro, a tiny powerhouse of a blaster. All the hardware you need is already provided by the Micros themselves. You just need to print parts in the colors of your chosing and you’re good to go to take a screwdriver to it.
This is the fifth reshell. It uses two Micros, to give you two hammer-primed barrels for those holdout situations. No real need to explain why this is cool, I feel. :D
---
All parts can be printed on a bed of 180mm edge length, if just barely. You'll need to look out for overhangs that need supports on this one. In particular for the hammers and the center shell pieces.
The assembly instructions can be found here -> https://wildwestscifi.net/x-shot-micro-reshell-5-double-hammer-assembly-instructions
---
Changelog:
v1.0 - Initial Release.