X-Shot Micro Reshell 7 v1.1 - Bolt-Action
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bolt-action reshell of the X-Shot Micro 1, a tiny powerhouse of a blaster.
- Ocena
- 5 / 5
- Polubienia
- 22
- Wydruki
- 1
- Wyświetlenia
- 738
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Standard Digital File License
This is a 3D-printable shell from the GenCo Microwerks for the X-Shot Micro, a tiny powerhouse of a blaster. All the hardware you need is already provided by the Micro itself. You just need to print parts in the colors of your chosing and you’re good to go to take a screwdriver to it.
The 7th reshell comes with a bolt to prime the whole thing. It's bigger than the previous reshells, to have something to hold onto. Also to gain +1 to coolness. That extra size gave me a bit of space for onboard dart storage. You can put 7 darts on each side and carry them around with you. This time the file set also comes with files for left- and right-handed versions, depending on which side you want the bolt to be on.
---
All parts can be printed on a bed of 180mm edge length, if just barely. Only the barrel front will need supports. Everything should already be in its proper printing orientation.
The assembly instructions can be found here -> https://wildwestscifi.net/x-shot-micro-reshell-7-bolt-action-assembly-instructions
---
Changelog:
v1.0 - Initial Release.
v1.1
- Added a rifle variant. Now you can decide to have a longer blaster and/or a full stock. Peruse the pieces as you desire.