X-Shot Micro Reshell 8 v1.0 - Lever-Action
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lever-action reshell of the X-Shot Micro 1, a tiny powerhouse of a blaster.
- Ocena
- 5 / 5
- Polubienia
- 52
- Wydruki
- 7
- Wyświetlenia
- 1840
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Standard Digital File License
This is a 3D-printable shell from the GenCo Microwerks for the X-Shot Micro, a tiny powerhouse of a blaster. All the hardware you need is already provided by the Micro itself. You just need to print parts in the colors of your chosing and you’re good to go to take a screwdriver to it.
The 8th reshell features a lever as its main method of priming the Micro. The blaster has a solid size to it that feels nice to sling around. It uses the same type of front barrel and dart storage as the 7th reshell.
The file set comes with long and short stock variants, as well as long and short barrel variants. Combine them as you desire and send me pictures~
---
Three of the parts cannot be printed on a bed of 180mm edge length. You'll need a print bed of 200+mm size for those. A few parts need supports. Everything should already be in its proper printing orientation.
The assembly instructions can be found here -> https://wildwestscifi.net/x-shot-micro-reshell-8-lever-action-assembly-instructions
---
Changelog:
v1.0 - Initial Release.